Bundles (5)

*Important: No Body Armor can be sold or shipped to Connecticut or New York *Lead Time – 15 Business Days (as of 10.19.23)* BattleVest Lite Introducing the Tacticon Battle Vest Lite, designed with a minimalist approach to reduce weight and enhance user mobility. This lightweight, low-profile plate carrier vest weighs just 1.5 lbs. and is constructed with durable 500D laminated nylon. The Battle Vest Lite plate carrier boasts 360-degree laser-cut PALS coverage, compatible with all MOLLE accessories. The laser-cut design offers an improvement over the traditional MOLLE grid by not only reducing weight but also increasing the strength and longevity of the plate carrier vest. With no sewn MOLLE loops, the risk of failure is minimized, and the likelihood of your accessories and equipment catching on the vest is significantly reduced. The Battle Vest Lite lightweight plate carrier also features fully adjustable hypalon shoulder straps, hook-and-loop web sections for ID panels, and accommodates 8"x10" and 10"x12" ballistic plates. NOTE: The Battle Vest Lite Plate Carrier does NOT accommodate side plates and is only compatible with 8"x10" and 10"x12" armor plates. AR500 Level III+ Body Armor Presenting the Tacticon Level 3+ Steel Core Body Armor Plates, delivering unmatched protection against multiple hits in a concentrated shot group. These long-lasting plates come with no expiration date or specific handling instructions, and they are priced at less than half the cost of their composite counterparts. Experience the unrivaled excellence of Tacticon AR500 Level 3+ body armor steel core plates. Tacticon ensures a lifetime warranty on all AR500 Level 3+ steel core body armor plates and plate carriers. Should you be shot while wearing the plate carrier and trauma pad, we will replace the plate carrier, plates, and trauma pad at no additional cost (police report required). Frag Mitigation Coating/Curve Features: .375" (3/8") frag mitigation build-up coat Full encapsulation of any fragments Plate curve designed to contour the body No additional cost for a feature that should be standard Steel Core AR500 Standard Steel Threats: 5.56 M855 7.62×39 762.x51 762.x54R Made in USA by Tacticon NIJ CERTIFIED  TA500STL <Click To See NIJ Lab Report> <Click To View Certification On NIJ Website>

*Important: No Body Armor can be sold or shipped to Connecticut or New York *14 Day Lead Time (as of 6.19.23) BattleVest Lite Introducing the Tacticon Battle Vest Lite, designed with a minimalist approach to reduce weight and enhance user mobility. This lightweight, low-profile plate carrier vest weighs just 1.5 lbs. and is constructed with durable 500D laminated nylon. The Battle Vest Lite plate carrier boasts 360-degree laser-cut PALS coverage, compatible with all MOLLE accessories. The laser-cut design offers an improvement over the traditional MOLLE grid by not only reducing weight but also increasing the strength and longevity of the plate carrier vest. With no sewn MOLLE loops, the risk of failure is minimized, and the likelihood of your accessories and equipment catching on the vest is significantly reduced. The Battle Vest Lite lightweight plate carrier also features fully adjustable hypalon shoulder straps, hook-and-loop web sections for ID panels, and accommodates 8"x10" and 10"x12" ballistic plates. NOTE: The Battle Vest Lite Plate Carrier does NOT accommodate side plates and is only compatible with 8"x10" and 10"x12" armor plates. AR600 Level III+ Body Armor Presenting the Tacticon Level 3+ Steel Core Body Armor Plates, delivering unmatched protection against multiple hits in a concentrated shot group. These long-lasting plates come with no expiration date or specific handling instructions, and they are priced at less than half the cost of their composite counterparts. Experience the unrivaled excellence of Tacticon AR600 Level 3+ body armor steel core plates. Tacticon ensures a lifetime warranty on all AR600 Level 3+ steel core body armor plates and plate carriers. Should you be shot while wearing the plate carrier and trauma pad, we will replace the plate carrier, plates, and trauma pad at no additional cost (police report required). Frag Mitigation Coating/Curve Features: .375" (3/8") frag mitigation build-up coat Full encapsulation of any fragments Plate curve designed to contour the body No additional cost for a feature that should be standard Steel Core AR600 Standard Steel Threats: 5.56 M855 7.62×39 762.x51 762.x54R Made in USA by Tacticon NIJ CERTIFIED  TA600STL <Click To See NIJ Lab Report> <Click To View Certification On NIJ Website>

*Important: No Body Armor can be sold or shipped to Connecticut or New York *14 Day Lead Time (as of 6.19.23) BattleVest V1 Introducing the Tacticon Battle Vest V1, our premier tactical plate carrier designed for adaptability and versatility. This plate carrier accommodates ballistic plates ranging from compact 8"x10" to extra-large 11"x14" sizes. The adjustable Tacticon Battle Vest V1 cummerbund fits waist sizes from 38" to 48" and includes integrated side pockets suitable for side plates up to 6"x8". Our plate carrier vest boasts fully adjustable shoulder straps, offering the option to remove the low-profile pads as needed. The breathable 3D mesh liner ensures wearer comfort and coolness, while MOLLE webbing covers all sides of the Battle Vest V1, enabling customization for various user setups such as combat, medical, or security. Furthermore, the vest features a built-in front map pocket with a secure snap closure, as well as side release buckles that can be used with or without the cummerbund, depending on preference. AR600 Level III+ Body Armor Presenting the Tacticon Level 3+ Steel Core Body Armor Plates, delivering unmatched protection against multiple hits in a concentrated shot group. These long-lasting plates come with no expiration date or specific handling instructions, and they are priced at less than half the cost of their composite counterparts. Experience the unrivaled excellence of Tacticon AR600 Level 3+ body armor steel core plates. Tacticon ensures a lifetime warranty on all AR600 Level 3+ steel core body armor plates and plate carriers. Should you be shot while wearing the plate carrier and trauma pad, we will replace the plate carrier, plates, and trauma pad at no additional cost (police report required). Frag Mitigation Coating/Curve Features: .375" (3/8") frag mitigation build-up coat Full encapsulation of any fragments Plate curve designed to contour the body No additional cost for a feature that should be standard Steel Core AR600 Standard Steel Threats: 5.56 M855 7.62×39 762.x51 762.x54R Made in USA by Tacticon NIJ CERTIFIED  TA600STL <Click To See NIJ Lab Report> <Click To View Certification On NIJ Website>

*Important: No Body Armor can be sold or shipped to Connecticut or New York *14 Day Lead Time (as of 6.19.23) BattleVest Elite Our plate carriers have earned a solid reputation among civilians, law enforcement officers, and even on Eastern European battlefields. While our existing carrier options continue to be effective, we have listened to our customers and revamped the design to surpass contemporary standards. Introducing the Battle Vest Elite. Crafted from 500D Nylon, this carrier guarantees durability for everyday use and weather resistance. Double stitching in high-stress areas ensures that the carrier maintains its structural integrity under demanding conditions. Weighing in at just 2 lbs. 9 oz, the Battle Vest Elite is lightweight and comfortable, featuring an inner breathable mesh that fits snugly to the body. Integrated shoulder pads enhance load-bearing capabilities while minimizing the footprint compared to our original battle vest, ensuring less interference with your weapon system. Our innovative Quick Release System includes four attachment points located on each shoulder and each side of the cummerbund. Simply pull the QD tabs firmly outward to quickly and easily remove the plate carrier from your body. The cummerbund showcases a skeletonized, fully adjustable design that accommodates users of various sizes. MOLLE attachments encircle the carrier, allowing for precise gear placement. Both the front and back of the carriers include Velcro across the MOLLE surface for secure integration of chest rigs and other hook-and-loop compatible gear items while maintaining compatibility with traditional MOLLE attachments. The rear of the lightweight Battle Vest Elite plate carrier has been tailored to fit our new backpack, which features a removable panel that seamlessly interfaces with the hook-and-loop Velcro on the back of the carrier and the side buckles for an unmatched secure fit. NOTE: The Battle Vest Elite Plate Carrier does NOT accommodate side plates and is only compatible with 8"x10" and 10"x12" armor plates. Trauma Pads Non-Newtonian foam is designed to absorb energy transfer when a round impacts your body armor plate, helping you stay in the fight. This advanced material is also used in motorcycle protective gear. Tacticon body armor trauma pads minimize injury to your body from back face deformation of the plate, such as broken ribs or other damage. Furthermore, our lightweight trauma pads enhance comfort and wearability by providing a cushioned barrier between you and your Tacticon AR500 / AR600 body armor plates. Tacticon Trauma Pads Body Armor comes with a lifetime warranty. If you are shot while wearing the plate carrier and trauma pad, we will replace the plate carrier, plates, and trauma pad at no cost to you (police report required). Level IV 7 lbs Multi-curve Armor Plate (TAFRIV) Tacticon Armament's Level IV armor is a high-performance composite of ceramic and UHMWPE (Ultra High Molecular Weight Polyethylene), weighing only 7 lbs. In accordance with the NIJ .06 standard, it is tested to halt (1) shot of 30-06 M2AP. This armor solution is designed to effectively stop an Armor Piercing round while managing trauma. As a complete standalone plate, it requires no additional soft armor. The plate's goal is to minimize weight while still providing the ability to stop an AP round. We always prioritize weight and comfort, which is why this plate features a multi-curve system to conform to your torso. This armor solution is also effective against other rifle threats, such as 5.56 M193/M855, 7.62x51(M80), and 7.62x39. Our body armor is engineered for optimal protection while offering superior comfort and a lightweight feel. Constructed from top-quality materials, this armor delivers excellent defense against bullets and other ballistic threats. The adjustable straps ensure a perfect fit, and our reinforced design guarantees durability and long-lasting wear. With its sleek design, our body armor is not only functional but also visually appealing. Can it stop rounds other than 30-06 M2AP? Yes! This plate is designed to stop 7.62x39 (122 gr) MSC, 5.56 M193/M855 variations, 7.62x51(M80), and all common handgun threats. Is it multi-hit? Yes. It can withstand more than one hit from the 30-06 M2AP. What is TPU (Thermal Polyurethane)? TPU, short for Thermal Polyurethane, is a plastic material that is heated to vacuum form around our plates. Following the vacuum forming process, we seal the edges with TPU to create a watertight seal that keeps moisture out and even repels diesel. Ensuring the covering is secure is a crucial yet often overlooked process, as it prevents moisture or foreign material from compromising the integrity of the composite armor. Specifications: Level IV Standalone Weight: 7 lbs Dimensions: 10”x12” Thickness: .80″ Curve: SAPI Multi-Curve Build: Ceramic and UHMWPE (Polyethylene) Covering: Wrapped with TPU (Thermal Polyurethane) water and diesel resistant Warranty: 6 Year Warranty Threats: .44 Magnum (240 gr) 1,460 fps 9mm (124gr) 1,335 fps  .357 Magnum (158gr) 1,460 fps .357 SIG (125 gr) 1,500 fps .40 S&W (180gr) 1,185 fps  .45 ACP (230 gr) 980 fps  5.56 (55 gr) FMJ 3,280 fps  7.62×39 (122 gr) MSC 2,410 fps 5.56 M855 (62 gr) Green Tip 3,145 fps 762.x51 (147 gr) M80 2,810 fps .30 Cal (166 gr) M2AP 2,910 fps Made in USA by Tacticon

*Important: No Body Armor can be sold or shipped to Connecticut or New York *14 Day Lead Time (as of 6.19.23) BattleVest Elite Our plate carriers have earned a solid reputation among civilians, law enforcement officers, and even on Eastern European battlefields. While our existing carrier options continue to be effective, we have listened to our customers and revamped the design to surpass contemporary standards. Introducing the Battle Vest Elite. Crafted from 500D Nylon, this carrier guarantees durability for everyday use and weather resistance. Double stitching in high-stress areas ensures that the carrier maintains its structural integrity under demanding conditions. Weighing in at just 2 lbs. 9 oz, the Battle Vest Elite is lightweight and comfortable, featuring an inner breathable mesh that fits snugly to the body. Integrated shoulder pads enhance load-bearing capabilities while minimizing the footprint compared to our original battle vest, ensuring less interference with your weapon system. Our innovative Quick Release System includes four attachment points located on each shoulder and each side of the cummerbund. Simply pull the QD tabs firmly outward to quickly and easily remove the plate carrier from your body. The cummerbund showcases a skeletonized, fully adjustable design that accommodates users of various sizes. MOLLE attachments encircle the carrier, allowing for precise gear placement. Both the front and back of the carriers include Velcro across the MOLLE surface for secure integration of chest rigs and other hook-and-loop compatible gear items while maintaining compatibility with traditional MOLLE attachments. The rear of the lightweight Battle Vest Elite plate carrier has been tailored to fit our new backpack, which features a removable panel that seamlessly interfaces with the hook-and-loop Velcro on the back of the carrier and the side buckles for an unmatched secure fit. NOTE: The Battle Vest Elite Plate Carrier does NOT accommodate side plates and is only compatible with 8"x10" and 10"x12" armor plates. Trauma Pads Non-Newtonian foam is designed to absorb energy transfer when a round impacts your body armor plate, helping you stay in the fight. This advanced material is also used in motorcycle protective gear. Tacticon body armor trauma pads minimize injury to your body from back face deformation of the plate, such as broken ribs or other damage. Furthermore, our lightweight trauma pads enhance comfort and wearability by providing a cushioned barrier between you and your Tacticon AR500 / AR600 body armor plates. Tacticon Trauma Pads Body Armor comes with a lifetime warranty. If you are shot while wearing the plate carrier and trauma pad, we will replace the plate carrier, plates, and trauma pad at no cost to you (police report required). SRT (Special Rifle Threat) 2.57 lbs Multi-curve Armor Plate (TASRT) Tacticon Armament's SRT (Special Rifle Threat) is a lightweight armor solution crafted from UHMWPE (Ultra High Molecular Weight Polyethylene), weighing a mere 2.57 lbs. The SRT armor is designed to address threats not traditionally tested by the NIJ .06 standard. It is tailored to keep your loadout light while protecting against common rifle rounds, such as the 5.56 M193 (standard AR-15 round) and the 7.62x39 (AK-47 round). This armor has been tested to withstand six shots from either the M193 or 7.62x39, while maintaining trauma within a safe range. This plate functions as a standalone unit, meaning no additional components are needed for trauma mitigation. Our body armor is engineered for maximum protection, delivering exceptional comfort and a lightweight feel. Constructed from top-quality materials, this armor offers excellent defense against bullets and other ballistic threats. The adjustable straps allow for a perfect fit, and the reinforced design ensures durability and lasting wear. With its sleek design, our body armor is not only practical but also visually appealing. Why is it a SRT and not level III? The NIJ .06 definition for Level III plate testing parameters require six shots of 7.62x51 (M80) with less than 44mm of back face signature on the first two shots and zero penetrations on the last four. We designed the SRT to address the more common threats of 5.56 and 7.62x39. Typically, a Level III plate is thicker and heavier to stop the excessive trauma created by the 147-grain 7.62x51 round. By focusing on "special rifle threats" not tested by the NIJ (5.56/7.62x39), we can create a lighter and thinner plate. Will it stop a 7.62×51 (M80)? Yes, it will stop the round with zero penetration. However, since the trauma may exceed the safety limit of 44mm, we do not advertise it as such. Is it Multi-hit? Yes, it is designed to effectively withstand six shots of M193 and 7.62x39 MSC while maintaining trauma within the acceptable range of under 44mm. Specifications: Level SRT Standalone Weight: 2.57 lbs Dimensions: 9.5”x12” Thickness: .65″ Curve: SAPI Multi-Curve Build: Ceramic and UHMWPE (Polyethylene) Covering: Wrapped in TPU (Thermal Polyurethane) water and diesel resistant Warranty: 6 Year Warranty Threats: .44 Magnum (240 gr) 1,460 fps 9mm (124gr) 1,335 fps .357 Magnum (158gr) 1,460 fps .357 SIG (125 gr) 1,500 fps .40 S&W (180gr) 1,185 fps .45 ACP (230 gr) 980 fps 5.56 (55gr) FMJ 3,280 fps 7.62×39 (122 gr) MSC 2,410 fps Made in USA by Tacticon